Qingling KV600 냉장 트럭

Technical parameters of the entire vehicle

Product trademark

Qingling brand

Announcement batch

377

product name

refrigerated truck

Model

QL5043XLCMTHAJ

Total mass (Kg)

4495

Tank volume (m3)

Rated load capacity (Kg)

1090

External dimensions (mm)

5995x2260x2970,3270

Curb weight (Kg)

3210

Cargo compartment size (mm)

4015x2100x1800,2100

Rated passenger capacity (person)

Total mass of quasi trailer (Kg)

Approach angle/departure angle (°)

19/17

Front/rear suspension (mm)

1110/1525

Axle load (Kg)

1750/2745

Maximum speed (km/h)

105,115

notes

1. The top of the car is closed and cannot be opened; 2. The net power of the engine is 101kW, the engine model is 4KH1N6MD, the fuel consumption value is 11.0L/100km, and the vehicle identification code is LWLDMMTG; The chassis is equipped with an optional engine 4KB1-TCG60, with a net power of 94kW and a fuel consumption value of 10.2L/100km. The vehicle identification code is LWLDMFMG; 3. Side protection material: steel plate Q235, connection method: bolted to the crossbeam of the carriage; Rear protection material: steel plate Q235, plate thickness 2.5mm, connection method: The rear protection bracket is connected to the rear end of the longitudinal beam of the frame with bolts. The size of the rear protection section is 139 × 50 (mm), and the ground height is 440mm; 4. This car allows the optional installation of right side single door or non door opening, and allows the installation of different units with equivalent power from different manufacturers; Allow optional installation of maintenance ladders, air ducts, aluminum guide rails, door curtains of different materials and structures, rear anti-collision blocks, etc. 5. The vehicle is equipped with a pneumatic braking system along with the chassis. The corresponding relationship between ABS and its controller model/manufacturer is CM4XL-4S/4M/Guangzhou Ruili Kemi Automotive Electronics Co., Ltd. 6. Allow optional installation of wide wheel arches, narrow wheel arches, signs, aluminum alloy steel rings, five hole wheels, etc. along with the chassis; 7. The curb weight includes spare tire, cushion film, 90% fuel, coolant, lubricant, etc. The weight of the car body is 922/934Kg, and the corresponding material of the floor/side panel is PU+fiberglass composite plate, with a thickness of 80/80 (mm). 8. The vehicle model can be equipped with ETC on-board device. 9. It is allowed to install hydraulic tailboard, with a horizontal length of 280mm when the hydraulic tailboard is folded up, a tailboard mass of 350kg, and a cylindrical structure for the rear protection, with a cross-sectional size of Ф 114mm, with a material thickness of 2.0mm and a height of 420mm.10 above the ground. Optional partition boards are allowed for the interior of the cabin.

Chassis technical parameters

Chassis Model

QL1043BUHAY

Chassis brand

Isuzu

manufacturing enterprise

Qingling Motors Company Limited

Address

number of axles

2

Number of tires

6

wheelbase

3360

Tire Size

7.00R16LT 8PR

Number of steel plate springs

3/3+2

Front wheelbase (mm)

1640,1685

Rear wheelbase (mm)

1525

fuel type

diesel oil

Emission standards

GB17691-2018 National VI

Engine model

Engine Manufacturer

Displacement (ml)

Power (Kw)

4KH1N6MD
4KB1-TCG60

Isuzu (China) Engine Co., Ltd

Isuzu (China) Engine Co., Ltd

2999
2499

103
96